NEW! Instructor Led Online Training from DDI
Now you can ramp up your skills and add to your personal and professional development without leaving your desk. DDI is taking classroom training to the web so you can have easy access to the SolidWorks classes you need. By learning online you will be able to:
- Save time - the online classes are held in 2-hour increments with a live instructor.
- Stay productive - return to your projects immediately and apply your new skills with minimal interruption to your work week.
- Join us no matter where you are and no matter where we teach.
- Enjoy a greater selection of classes.
Full Schedule
For more information, call 877-369-6128 or email
This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
.
San Diego Upcoming Training
February 23 Duration: 4 days (February 16, 17, 23, 24, 2012)
This classroom based course is focused on advanced part and advanced assembly modeling. Topics include:
Multibody Solids
Sweeping and Lofting Features
Splines
Top Down Assembly Modeling
Configurations and Assemblies
Layout Based Assembly Design
Large Assemblies
Course ID: ADVSD0212
Questions? Call 877-369-6128 or email us at training@ddicad.com Register
March 5 Duration: 5 days (March 5, 6, 12, 13, 14, 2012)
Classroom based course to establish a foundation of skills necessary to begin implementation. Included in the instruction is basic part modeling, cut, revolved features, linear and circular patterns, thin walled (shelled) parts, bills of material creation and item/part identification (ballooning). Additional topics include assembly modeling, detail drawing creation, and student-specific issues.
Course ID: ESSSD0312
Questions? Call 877-369-6128 or email us at training@ddicad.com Register
March 7 Duration: 2 days (March 7 - 8, 2012)
Classroom based course that provides an in-depth session on the basics of fluid flow analysis, in addition to covering meshing concerns, modeling concerns, analysis, post-processing, available options and preferences.
Course ID: FLOSD0312
Questions? Call 877-369-6128 or email us at training@ddicad.com Register
March 12 Duration: 5 days (March 5, 6, 12, 13, 14, 2012)
Classroom based course to establish a foundation of skills necessary to begin implementation. Included in the instruction is basic part modeling, cut, revolved features, linear and circular patterns, thin walled (shelled) parts, bills of material creation and item/part identification (ballooning). Additional topics include assembly modeling, detail drawing creation, and student-specific issues.
Course ID: ESSSD0312
Questions? Call 877-369-6128 or email us at training@ddicad.com Register
April 9 Duration: 4 days (April 9, 10, 16, 17, 2012)
This classroom based course is focused on advanced part and advanced assembly modeling. Topics include:
Multibody Solids
Sweeping and Lofting Features
Splines
Top Down Assembly Modeling
Configurations and Assemblies
Layout Based Assembly Design
Large Assemblies
Course ID: ADVSD0412
Questions? Call 877-369-6128 or email us at training@ddicad.com Register
April 11 Duration: 5 days (April 11, 12, 13, 19, 20, 2012)
Classroom based course to establish a foundation of skills necessary to begin implementation. Included in the instruction is basic part modeling, cut, revolved features, linear and circular patterns, thin walled (shelled) parts, bills of material creation and item/part identification (ballooning). Additional topics include assembly modeling, detail drawing creation, and student-specific issues.
Course ID: ESSSD0412
Questions? Call 877-369-6128 or email us at training@ddicad.com Register
April 16 Duration: 4 days (April 9, 10, 16, 17, 2012)
This classroom based course is focused on advanced part and advanced assembly modeling. Topics include:
Multibody Solids
Sweeping and Lofting Features
Splines
Top Down Assembly Modeling
Configurations and Assemblies
Layout Based Assembly Design
Large Assemblies
Course ID: ADVSD0412
Questions? Call 877-369-6128 or email us at training@ddicad.com Register
April 19 Duration: 5 days (April 11, 12, 13, 19, 20, 2012)
Classroom based course to establish a foundation of skills necessary to begin implementation. Included in the instruction is basic part modeling, cut, revolved features, linear and circular patterns, thin walled (shelled) parts, bills of material creation and item/part identification (ballooning). Additional topics include assembly modeling, detail drawing creation, and student-specific issues.
Course ID: ESSSD0412
Questions? Call 877-369-6128 or email us at training@ddicad.com Register
|
Phoenix Upcoming Training
Mar 1, Duration: 5 days (March 1, 2, 7, 8, 9, 2012)
Classroom based course to establish a foundation of skills necessary to begin implementation. Included in the instruction is basic part modeling, cut, revolved features, linear and circular patterns, thin walled (shelled) parts, bills of material creation and item/part identification (ballooning). Additional topics include assembly modeling, detail drawing creation, and student-specific issues.
Course ID: ESSPHX0312
Questions? Call 877-369-6128 or email us at training@ddicad.com Register
Mar 5, Duration: 4 days (March 5, 6, 12, 13, 2012)
This classroom based course is focused on advanced part and advanced assembly modeling. Topics include:
Multibody Solids
Sweeping and Lofting Features
Splines
Top Down Assembly Modeling
Configurations and Assemblies
Layout Based Assembly Design
Large Assemblies
Course ID: ADVPHX0312
Questions? Call 877-369-6128 or email us at training@ddicad.com Register
Mar 7, Duration: 5 days (March 1, 2, 7, 8, 9, 2012)
Classroom based course to establish a foundation of skills necessary to begin implementation. Included in the instruction is basic part modeling, cut, revolved features, linear and circular patterns, thin walled (shelled) parts, bills of material creation and item/part identification (ballooning). Additional topics include assembly modeling, detail drawing creation, and student-specific issues.
Course ID: ESSPHX0312
Questions? Call 877-369-6128 or email us at training@ddicad.com Register
Mar 12, Duration: 4 days (March 5, 6, 12, 13, 2012)
This classroom based course is focused on advanced part and advanced assembly modeling. Topics include:
Multibody Solids
Sweeping and Lofting Features
Splines
Top Down Assembly Modeling
Configurations and Assemblies
Layout Based Assembly Design
Large Assemblies
Course ID: ADVPHX0312
Questions? Call 877-369-6128 or email us at training@ddicad.com Register
Mar 14, Duration: 2 days (March 14 - 15, 2012)
Classroom based course covering linear stress analysis, gap/contact analysis, and best practices. Analysis features are discussed using an integrated approach of the Simulation software from within the SolidWorks environment. Finally, examples of parts and assemblies including those with various gap/contact conditions are reviewed.
Course ID: SIMPHX0312
Questions? Call 877-369-6128 or email us at training@ddicad.com Register
Mar 16, Duration: 1 day (March 16, 2012)
Classroom based course that teaches students how to use the SolidWorks Simulation Professional software to help you perform frequency, thermal, buckling and drop test analyses on your SolidWorks part and assembly models.
Course ID: SIMPROPHX0312
Questions? Call 877-369-6128 or email us at training@ddicad.com Register
Apr 2, Duration: 5 days (April 2, 3, 9, 10, 11, 2012)
Classroom based course to establish a foundation of skills necessary to begin implementation. Included in the instruction is basic part modeling, cut, revolved features, linear and circular patterns, thin walled (shelled) parts, bills of material creation and item/part identification (ballooning). Additional topics include assembly modeling, detail drawing creation, and student-specific issues.
Course ID: ESSPHX0412
Questions? Call 877-369-6128 or email us at training@ddicad.com Register
Apr 9, Duration: 5 days (April 2, 3, 9, 10, 11, 2012)
Classroom based course to establish a foundation of skills necessary to begin implementation. Included in the instruction is basic part modeling, cut, revolved features, linear and circular patterns, thin walled (shelled) parts, bills of material creation and item/part identification (ballooning). Additional topics include assembly modeling, detail drawing creation, and student-specific issues.
Course ID: ESSPHX0412
Questions? Call 877-369-6128 or email us at training@ddicad.com Register
|
|
